This is the RAMFast 'D' SCSI v3.01F ROM. Looking to upgrade your RAMFast SCSI card to the latest ROM? You'll need this!
Note: This ROM will only work on revision 'D' cards.
The ROM file is also available >HERE< for free if you wish to burn your own.
Tip: The manual for the RAMFast SCSI card can be found >HERE<.
If you hold down a number key from '1' through '9' when you turn the power on then the partition in the Logical Devices list corresponding to the number held down is booted. For example: holding down the '2' key will boot the second partition in the list; holding down the '6' key will boot the sixth partition in the list; etc. This can be very handy if you sometimes want to boot GS/OS and other times want to boot ProSel or even ProDOS 8. One thing to be aware of is that the selected partition becomes the default boot partition until another key is held down or you turn off the power to the computer. You can make the change permanent by running the Utility program and saving the current configuration.
If you hold down the '0' key at power up the utility program will boot. This can be handy if you have lost or misplaced the copy of the utility program that the Install command put on your hard drive. It will also tell you what version of the ROM is installed on the RAMFast SCSI card.
Note that the above defeats the GS/OS convention that holding down the '8' key while booting will boot into ProDOS 8. Holding down the '8' key when the RamFAST/SCSI is installed will result in partition 8 being booted (if the partition is bootable).
If you have any tips or info for this product that should be added to this listing please email >Support<. We of ReactiveMicro.com and the Apple II Community thank you!